FLUXAK 1027 is a multi-purpose water-based flux formulated from the synthesis of acids and amines. Due to its free acidity, this flux has good ‘pickling’ power or activity. This flux is eliminated by sublimation in the range of temperatures where lead and alloys used for battery manufacturing melt. Since no residual salts or combustion residues remain after soldering (casting), problems linked to conductivity (self-discharge) and corrosion are solved when using this technology. As stated it is without combustion residues, the pieces remain in their original state and the flux does not pollute the welding or tinning baths.
The flux must be used undiluted on the surface of the lugs by dipping or impregnation.
MAIN COMPOUNDS Bromo hydrated amine salts, wetting agents, inhibitors.
PHYSICAL CHARACTERISTICS Appearance : Amber liquid Density at 20°C: 1.125 +/-0.01 g/cm3 pH : 1
MAIN CHARACTERISTICS Organic flux with good pickling power and is totally eliminated at the welding temperature.
Without particular risk Refer to health and safety datasheets before use.