Non-Corrosive flux, totally eliminated when dipped into the lead bath. The flux is formulated from pure organic compounds (in water solution) and eliminated by sublimation. No residual salts or combustion residues remain after soldering (casting), problems linked to conductivity (self-discharge) and corrosion are solved when using this technology.
Liquid neutral flux halogen free, fully burnt off after heating and without residues COMPOSITION Secondary organic amine salts PHYSICO-CHEMICAL PROPERTIES Density at 20° C ≈1,11 g/cm3 pH = 5
This flux is of particular interest for the manufacture of starter battery lead calcium and storage batteries where self-discharge phenomena must be avoided. It is a neutral flux and as such a multi purpose product intended to be used regardless of the type of strap and grid alloys.
The flux must be used undiluted on the surface of the lugs by dipping or impregnation.
Without particular risk - Refer to health and safety datasheets before