Corrosive flux, intended for the soldering of tinned stainless steels. This flux allows a good adherence on the metal. It is formulated from acids without halides in aqueous solution. Without chlorides, it doesn’t cause any later corrosion on stainless steels.
Liquid flux with a free of halides acids basis. The main chemical and physical properties are :
This flux is particularly used for the brazing of tinned stainless steels with Tin/Lead brazing SnPb 32/67 (rods, bolt ….)
This flux must be used pure on the surface of the pieces to be soldered. After cleaning and removing grease of the piece to be soldered, spread the flux with a brush. Heat the pieces until the melting of the filler metal. After soldering, wipe with a wet cloth.
The precautions for the handling of chemical products must be applied Please refer to the Material Safety Data Sheet available on request