FLUX-IT 341

FLUX-IT 341 - FLUX-IT 341

It is a flux paste intended for brazing Copper/Brass/Steel and Stainless Steel with all Silver alloys with a great pickling power. The flux residues are eliminated by thermal shock (dipping in cold water) or by brushing. The paste Flux-it paste 341 allows a very good adhesion even on a vertical surface. There is neither retention nor profusion, so it provides a good brazing stability while melting.

  • Paste
  • Brass, copper, steel, stainless steel
  • Cu/Ag
  • Brass, copper, steel, stainless steel
  • No
  • 650-750° C
  • General purpose, extended heating

CHARACTERISTICS - PHYSICO-CHEMICAL PROPERTIES, COMPOUND ELEMENTS

Homogeneous white paste without any boric acid or soluble borates.

. PRODUCT APPLICATION

The Flux-it paste 341 is advised for brazing by an oxy-acetylenic flame or by gas at temperatures between 550 and 880° C.

DIRECTIONS FOR USE

The Flux-it paste 341 is used by brushing or dipping the filler metal rod in the paste, then apply the filler metal rod coated on the pre-heated based metal.

USING CARE AND RECOMMENDATIONS

No particular risk. Refer to health and safety datasheet before use available on demand

You might also be interested in

Stay up to date with our latest news